|
| |
 |
Typical Applications
To door bottoms
To meeting stiles of double doors
To all sides of wicker doors Fitting details
Cut the strip to the required length, to fit inside at the bottom of the door (cut at the
end with extra slots) seal the ends of Starseal DB with pliers and hammer, i.e. cut the
carrier 5mm shorter than the width of the door. Slide the seal out of the carrier and cut
1 mrn from each end with pliers. This will seal the inner carrier, preventing the bristles
failing out. Slide the seal back and close the jaws on the carrier with a hammer. File off
rough edges. Supplied in lengths of 0.914M. Also available in white and brown.
|
|
