Pyroglaze Channel is a neoprene based U shaped
gasket preformed glazing seal for 30 minute fire protection, easily fitted around the
periphery of fire resisting glass. It can be used to glaze apertures in fire resisting
doors, screens and partitions. Pyroglaze Channel has been fire tested/assessed to BS476 Pt
22 1987 providing in excess of 30 minutes fire resistance when used in conjunction with
the following glasses:
 | Georgian Wired
Pyrobel
Pyroguard
Firelite
Pyrobelite
Pyrodur
Pyran
Pyroshield
Pyrostop |
Note: All sizes in mm
All the above products, where relevant, are tested to British Standards 476: Parts
8, 20, 22 and 31.1
|
Installation Glazing rebates must be free from dirt, grit or
friable materials. Pyroglaze Channel should be cut to suit the glass size to be installed.
Pyroglaze Channel can be cut with a sharp knife or scissors. Pyroglaze Channel should be
fitted around the edges of the glass. The first glazing bead should be fixed into position
using steel pins 38mm long at 150mm centres. The glass, together with the Pyroglaze
Channel should be offered up into ths opening. The second glazing bead should be fixed
into position using 38mm long steel pins at 150mm centres. N.B. All pins must be splayed
so they fit under the glass. Any Timber used in the construction must have a minimum
density of 65OKG/M 3 |
